DFI LanParty 865PE User Manual download pdf (Page 99)

BIOS Setup

3.1.8.4 CPU Clock Now Is

This field will show the CPU clock based on the settings in the

“CPU Clock” and “CPU Clock Ratio” fields.

3.1.8.5 AGP/PCI/SATA Clock

This field is used to select the bus clock of the AGP, PCI and

SATA.

3.1.8.6 Auto Detect PCI Clk

When enabled, the system will automatically send clock signals to

existing PCI devices.

3.1.8.7 Spread Spectrum

Leave this field in its default setting. Do not alter this setting un-

less advised by an engineer or technician.

3.1.8.8 Current CPU Voltage

This field will show the detected voltage of the CPU.

3.1.8.9 CPU Voltage Control

This field allows you to manually adjust to a higher core voltage

that is supplied to the CPU. If you want to use the CPU’s default

core voltage, leave this field in its default setting. The CPU’s Vcore

will be generated according to the CPU VID configuration.

Important:

Although this function is supported, we do not recommend that

you use a higher voltage because unstable current may be sup-

plied to the system board causing damage.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 144 145

No comments

DFI LanParty 865PE User Manual Page 99