DFI LanParty 865PE User Manual download pdf (Page 25)

Hardware Installation

5. Once the CPU is in place, push down the lever to lock the

socket. The lever should click on the side tab to indicate that

the CPU is completely secured in the socket.

2.3.3 Installing the Fan and Heat Sink

The CPU must be kept cool by using a CPU fan with heatsink.

Without sufficient air circulation across the CPU and heat sink,

the CPU will overheat damaging both the CPU and system board.

Note:

• Only use Intel

certified fan and heat sink.

• An Intel

boxed processor package contains a retention

mechanism, heat sink, fan and installation guide. If the instal-

lation procedure in the installation guide differs from the one

in this section, please follow the installation guide in the

package.

• If you are installing a non-boxed processor, the heat sink, fan

and retention mechanism assembly may look different from

the one shown in this section but the procedure will more or

less be the same.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 144 145

No comments

DFI LanParty 865PE User Manual Page 25