DFI LanParty 865PE User Manual download pdf (Page 28)

Hardware Installation

2.4 Jumper Settings

2.4.1 Jumper Settings for Clearing CMOS Data

If you encounter the following,

a) CMOS data becomes corrupted.

b) You forgot the supervisor or user password.

c) You are unable to boot-up the computer system because the proc-

essor’s ratio/clock was incorrectly set in the BIOS.

you can reconfigure the system with the default values stored in

the ROM BIOS.

To load the default values stored in the ROM BIOS, please follow

the steps below.

1. Power-off the system.

2. Set JP5 pins 2 and 3 to On. Wait for a few seconds and set

JP5 back to its default setting, pins 1 and 2 On.

3. Now power-on the system.

If your reason for clearing the CMOS data is due to incorrect

setting of the processor’s ratio/clock in the BIOS, please pro-

ceed to step 4.

2-3 On:

Clear CMOS Data

1-2 On: Normal

(default)

312 312

JP5

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 144 145

No comments

DFI LanParty 865PE User Manual Page 28