DFI LanParty 865PE User Manual download pdf (Page 89)

BIOS Setup

3.1.5.3 Run VGABIOS if S3 Resume

When this field is set to Auto, the system will initialize the VGA

BIOS when it wakes up from the S3 state. This can be configured

only if the “ACPI Suspend Type” field is set to “S3(STR)”.

3.1.5.4 Power Management

This field allows you to select the type (or degree) of power

saving by changing the length of idle time that elapses before the

“Suspend Mode” and “HDD Power Down” field is activated.

Min Saving Minimum power saving time for the “Suspend

Mode” and “HDD Power Down” = 15 min.

Max Saving Maximum power saving time for the “Suspend

Mode” and “HDD Power Down” = 1 min.

User Define Allows you to set the power saving time in the

“Suspend Mode” and “HDD Power Down” field.

3.1.5.5 Video Off Method

This determines the manner in which the monitor is blanked.

V/H SYNC + Blank This selection will cause the system to

turn off the vertical and horizontal syn-

chronization ports and write blanks to the

video buffer.

Blank Screen This option only writes blanks to the video

buffer.

DPMS Initializes display power management signaling.

Use this option if your video board supports it.

3.1.5.6 Video Off In Suspend

This field is used to activate the video off feature when the sys-

tem enters the Suspend mode.

3.1.5.7 Suspend Mode

When the system enters the Suspend mode, the CPU and

onboard peripherals will be shut off.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 144 145

No comments

DFI LanParty 865PE User Manual Page 89