DFI LanParty 865PE User Manual download pdf (Page 72)

BIOS Setup

3.1.2.9 USB Flash Disk Type

HDD Emulates the USB flash disk to HDD mode.

Floppy Emulates the USB flash disk to floppy mode.

3.1.2.10 First Boot Device, Second Boot Device, Third Boot Device

and Boot Other Device

Select the drive to boot first, second and third in the “First Boot

Device” “Second Boot Device” and “Third Boot Device” fields

respectively. The BIOS will boot the operating system according

to the sequence of the drive selected. Set “Boot Other Device”

to Enabled if you wish to boot from another device.

3.1.2.11 Swap Floppy Drive

When this field is enabled and the system is booting from the

floppy drive, the system will boot from drive B instead of drive A.

When this field is disabled and the system is booting from the

floppy drive, the system will boot from drive A. You must have

two floppy drives to use this function.

3.1.2.12 Boot Up Floppy Seek

When enabled, the BIOS will check whether the floppy disk drive

installed is 40 or 80 tracks. Note that the BIOS cannot distinguish

between 720K, 1.2M, 1.44M and 2.88M drive types as they are all 80

tracks. When disabled, the BIOS will not search for the type of

floppy disk drive by track number. Note that there will not be any

warning message if the drive installed is 360KB.

3.1.2.13 Boot Up NumLock Status

This allows you to determine the default state of the numeric

keypad. By default, the system boots up with NumLock on

wherein the function of the numeric keypad is the number keys.

When set to Off, the function of the numeric keypad is the ar-

row keys.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 144 145

No comments

DFI LanParty 865PE User Manual Page 72