DFI LanParty 865PE User Manual Page 90

  • Download
  • Add to my manuals
  • Print
  • Page
    / 145
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 89
90
3
BIOS Setup
3.1.5.8 HDD Power Down
This is selectable only when the Power Management field is set
to User Define. When the system enters the HDD Power Down
mode according to the power saving time selected, the hard disk
drive will be powered down while all other devices remain ac-
tive.
3.1.5.9 Soft-Off by PWR-BTTN
This field allows you to select the method of powering off your
system.
Delay 4 Sec. Regardless of whether the Power Management
function is enabled or disabled, if the power but-
ton is pushed and released in less than 4 sec, the
system enters the Suspend mode. The purpose of
this function is to prevent the system from
powering off in case you accidentally “hit” or
pushed the power button. Push and release again
in less than 4 sec to restore. Pushing the power
button for more than 4 seconds will power off
the system.
Instant-Off Pressing and then releasing the power button at
once will immediately power off your system.
3.1.5.10 Resume on PCI Event
Enabled This field should be set to Enabled only if your PCI
card such as LAN card or modem card uses the PCI
PME (Power Management Event) signal to remotely
wake up the system. Access to the LAN card or PCI
card will cause the system to wake up. Refer to the
card’s documentation for more information.
Disabled The system will not wake up despite access to the
PCI card.
3.1.5.11 Resume On Ring
When this field is set to Enabled, the system will power-on to re-
spond to calls coming from an external modem.
Page view 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 144 145

Comments to this Manuals

No comments