DFI LanParty 865PE User Manual download pdf (Page 68)

BIOS Setup

3.1.1.5 Video

This field selects the type of video adapter used for the primary

system monitor. Although secondary monitors are supported, you

do not have to select the type. The default setting is EGA/VGA.

EGA/VGA Enhanced Graphics Adapter/Video Graphics Array.

For EGA, VGA, SVGA and PGA monitor adapters.

CGA 40 Color Graphics Adapter. Power up in 40-column

mode.

CGA 80 Color Graphics Adapter. Power up in 80-column

mode.

Mono Monochrome adapter. Includes high resolution

monochrome adapters.

3.1.1.6 Halt On

This field determines whether the system will stop if an error is

detected during power up. The default setting is All Errors.

No Errors The system boot will not stop for any errors de-

tected.

All Errors The system boot will stop whenever the BIOS de-

tects a non-fatal error.

All, But Keyboard The system boot will not stop for a key-

board error; it will stop for all other errors.

All, But Diskette The system boot will not stop for a disk er-

ror; it will stop for all other errors.

All, But Disk/Key The system boot will not stop for a disk or

keyboard error; it will stop for all other er-

rors.

3.1.1.7 Base Memory

Displays the amount of base (or conventional) memory installed

in the system. The value of the base memory is typically 512K for

systems with 512K memory installed on the motherboard or

640K for systems with 640K or more memory installed on the

motherboard.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 144 145

No comments

DFI LanParty 865PE User Manual Page 68