DFI LanParty 865PE User Manual download pdf (Page 66)

BIOS Setup

The settings on the screen are for reference only. Your version may not be identical

to this one.

IDE HDD Auto Detection

Detects the parameters of the drive. The parameters will auto-

matically be shown on the screen.

IDE Channel 0 Master/Slave and IDE Channel 1 Master/Slave

The drive type information should be included in the documenta-

tion from your hard disk vendor. If you select ”Auto”, the BIOS

will auto-detect the HDD & CD-ROM drive at the POST stage

and show the IDE for the HDD & CD-ROM drive. If a hard disk

has not been installed, select “None”.

Access Mode

For hard drives larger than 528MB, you would typically select the

LBA type. Certain operating systems require that you select CHS

or Large. Please check your operating system’s manual or Help

desk on which one to select.

3.1.1.3 IDE Channel 0 Master, IDE Channel 0 Slave, IDE Channel 1

Master and IDE Channel 1 Slave

Move the cursor to the “IDE Channel 0 Master”, “IDE Channel 0

Slave”, “IDE Channel 1 Master” or “IDE Channel 1 Slave” field,

then press <Enter>.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 144 145

No comments

DFI LanParty 865PE User Manual Page 66