DFI LanParty 865PE User Manual download pdf (Page 14)

Introduction

Dual Function Power Button

Depending on the setting in the “Soft-Off By PWR-BTTN” field of

the Power Management Setup, this switch will allow the system

to enter the Soft-Off or Suspend mode.

Wake-On-Ring

This feature allows the system that is in the Suspend mode or

Soft Power Off mode to wake-up/power-on to respond to calls

coming from an external modem or respond to calls from a

modem PCI card that uses the PCI PME (Power Management

Event) signal to remotely wake up the PC.

Important:

If you are using a modem add-in card, the 5VSB power source

of your power supply must support a minimum of

≥

720mA.

Wake-On-LAN

This feature allows the network to remotely wake up a Soft

Power Down (Soft-Off) PC. It is supported via the onboard LAN

port, via a PCI LAN card that uses the PCI PME (Power Manage-

ment Event) signal or via a LAN card that uses the Wake-On-

LAN connector. However, if your system is in the Suspend mode,

you can power-on the system only through an IRQ or DMA

interrupt.

Important:

The 5VSB power source of your power supply must support

≥

720mA.

Wake-On-PS/2 Keyboard/Wake-On-Mouse

This function allows you to use the PS/2 keyboard or PS/2

mouse to power-on the system.

Important:

The 5VSB power source of your power supply must support

≥

720mA.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 144 145

No comments

DFI LanParty 865PE User Manual Page 14