DFI CL630-CRM User Manual download pdf (Page 172)

172

Troubleshooting

System Board

1. Make sure the add-in card is seated securely in the expansion slot. If the

add-in card is loose, power off the system, re-install the card and power up

the system.

2. Check the jumper settings to ensure that the jumpers are properly set.

3. Verify that all memory modules are seated securely into the memory sockets.

4. Make sure the memory modules are in the correct locations.

5. If the board fails to function, place the board on a ﬂ at surface and seat all

socketed components. Gently press each component into the socket.

6. If you made changes to the BIOS settings, re-enter setup and load the BIOS

defaults.

1 2 ... 167 168 169 170 171 172

No comments

DFI CL630-CRM User Manual Page 172