DFI SB630-CRM User Manual download pdf (Page 183)

183

Troubleshooting

System Board

1. Make sure the add-in card is seated securely in the expansion slot. If the

add-in card is loose, power off the system, re-install the card and power up

the system.

2. Check the jumper settings to ensure that the jumpers are properly set.

3. Verify that all memory modules are seated securely into the memory sockets.

4. Make sure the memory modules are in the correct locations.

5. If the board fails to function, place the board on a ﬂ at surface and seat all

socketed components. Gently press each component into the socket.

6. If you made changes to the BIOS settings, re-enter setup and load the BIOS

defaults.

1 2 ... 178 179 180 181 182 183

No comments

DFI SB630-CRM User Manual Page 183