
CS65-EC
rev. A+
Wake-On-USB Keyboard for USB 1 and 2 - JP1 : 1-2 On: Disabled (default); 2-3 On: Enabled
Wake-On-USB Keyboard for USB 3 and 4 - JP4 : 1-2 On: Disabled (default); 2-3 On: Enabled
Boot Block Lock/Unlock - JP6 (For factory use only)
1-2 On: Unlock boot block (default); 2-3 On: Lock boot block
Clear CMOS Data - JP5 : 1-2 On: Normal (default); 2-3 On: Clear CMOS Data
If you forgot the supervisor/user password or the CPUs clock/ratio was incorrectly set in the
BIOS, clear the CMOS data by setting this jumper to 2-3 On. Make sure to power-off the system prior to clearing the CMOS data.
Wake-On-KB/Mouse - JP2 : 1-2 On: Disabled (default); 2-3 On: Enabled
If you wish to disable the password set in the KB Power On Password field, make sure to set the Keyboard/Mouse Power On field
to Disabled prior to setting this jumper to disabled. You will not be able to boot up the system if you fail to do so.
LEDs: The DIMM Standby Power LED will turn red when the systems power is on or when it is in the Suspend state (Power On
Suspend or Suspend to RAM). It will not light when the system is in the Soft-Off state. The PCI Standby Power LED will turn red
when the system is in the power-on, Soft-Off or Suspend (Power On Suspend or Suspend to RAM) state. Lighted LEDs serve as a
reminder that you must power-off the system then turn off the power supplys switch or unplug the power cord prior to installing any
DIM modules or add-in cards.
If you are using the (1) Wake-On-KB/Mouse, (2) Wake-On-LAN and/or (3) Wake-On-Ring (internal modem) functions, the 5VSB
power source of your power supply must support ≥ 720mA.
If you are using the Suspend to RAM function, the 5VSB power source of your power supply must support ≥ 1A
If you are using the Wake-On-USB KB function for 2 USB ports, the 5VSB power source of your power supply must support ≥ 1.5A.
If you are using the Wake-On-USB KB function for 4 USB ports, the 5VSB power source of your power supply must suppor t ≥ 2A.
44301031
CPU/DIMM
Auto*
66/100MHz
100/100MHz
133/100MHz
133/133MHz
* denotes default setting
JP9
1-2 On
2-3 On
All Off
All Off
2-3 On
JP10
1-2 On
2-3 On
2-3 On
All Off
All Off
CPU FSB Select - JP9 and JP10
PC Speaker / Buzzer Select - JP7
1-2 On: Buzzer (default)
2-3 On: PC speaker
Comments to this Manuals