DFI LanParty nF4 User Manual download pdf (Page 36)

Hardware Installation

Jumper Settings

If you encounter the following,

a) CMOS data becomes corrupted.

b) You forgot the supervisor or user password.

c) You are unable to boot-up the computer system because the

processor’s ratio/clock was incorrectly set in the BIOS.

you can reconfigure the system with the default values stored in the

ROM BIOS.

To load the default values stored in the ROM BIOS, please follow

the steps below.

1. Power-off the system and unplug the power cord.

2. Set JP2 pins 2 and 3 to On. Wait for a few seconds and set JP2

back to its default setting, pins 1 and 2 On.

3. Now plug the power cord and power-on the system.

If your reason for clearing the CMOS data is due to incorrect

setting of the processor’s ratio/clock in the BIOS, please proceed

to step 4.

2-3 On:

Clear CMOS Data

1-2 On: Normal

(default)

JP2

Clear CMOS Data

132 132

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 145 146

No comments

DFI LanParty nF4 User Manual Page 36