DFI 915GM-MIGF User Manual download pdf (Page 44)

Hardware Installation

Floppy Disk Drive Connector

The system board is equipped with a shrouded floppy disk drive

connector for connecting standard floppy disk drives. To prevent im-

proper floppy cable installation, the shrouded floppy disk header has

a keying mechanism. The 34-pin connector on the floppy cable can

be placed into the header only if pin 1 of the connector is aligned

with pin 1 of the header.

Connecting the Floppy Disk Drive Cable

Install one end of the floppy disk drive cable into the shrouded

floppy disk header (J20) on the system board and the other end-

most connector to the drive you want to designate as Drive A. If

you are connecting another drive (Drive B), install the middle connec-

tor of the cable to the drive. The colored edge of the daisy chained

ribbon cable should be aligned with pin 1 of J20.

BIOS Setting

Enable or disable this function in the Integrated Peripherals submenu

(“Super IO Device” field) of the BIOS. Refer to chapter 3 for more

information.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 120 121

No comments

DFI 915GM-MIGF User Manual Page 44